- Regular visual inspections
Regular visual inspections (most likely for the climbing wall surface) allow the uncovering of apparent damages like: dirt, loose holds, unstable elements, wearing out, and hindrance in the climbing space. It is advisable to make the inspection weekly or even daily for climbing walls with frequent use or subject to possible vandalism.
- Operative inspections
The operative inspection is a detailed review of the stability and right functioning of the artificial climbing structure and special attention must be paid to the protection points. If a protection point is loose, it is not permitted to use it again until it has been tightened and put to the right position. Changing parts, if necessary, should be done by the manufacturer. This inspection has to be done every 1 to 3 months.
- Major annual inspections
The aim of the major annual inspection is to determine the condition and the security level of the artificial climbing wall structure. This requires a detailed inspection of the suppot structure, its foundation, attachment points (to the existing building), welds, bolts, protection points, the whole climbing surface, etc.
- All bolts must be checked and tightened
- Perform visual inspection of all welds - cracks are unacceptable
- Check all protection points - if a protection point is loose it must be tightened and placed in the right position
The major annual inspection must be performed by a qualified technical expert. It can include the dismounting of some elements from the climbing wall structure and following remounting in accordance to the manufacturer.
As a part of a longer warranty contracts Walltopia performs the annual inspection of the climbing wall. For all other cases we offer maintenance packages to suit all our customers.
Our clients are ensured to receieve a set of core services such as design and engineering at the design stage of every project and can choose from a wide range of complimentary services available at the post-construction phase such as testing of the climbing wall according to the European standard, training, maintenance and inspection of the climbing facility and more.
Design Engineering Production Assembly Post-Construction
-Consultation - Engineering -Transformable Walls -Autobelay Installation -Route Setting
-Design -Prefabrication -Testing -Training
-Full Color Printing -Dismantling / Assembly -Maintenance
Copyright 2010 Walltopia Ltd. Design and development: Redutta